Printimine

Printimine

 
Printimiskiirus
91 m²/hr - Max Speed (1 pass)
31 m²/hr - Outdoor High Speed (4 pass)
23 m²/hr - Outdoor Plus (6 pass)
17 m²/hr - Indoor Quality (8 pass)
14 m²/hr - Indoor High Quality (10 pass)
6 m²/hr - Backlits, Textiles, and Canvas (16 pass)
5 m²/hr - High Saturation Textiles (20 pass)
Prindikvaliteet, värviline (parim):
Up to 1200 x 1200 dpi
Printimise tehnoloogia:
  • HP Latex Printing Technologies
Tinditüübid:
  • HP Latex Inks
Prindikassettide arv:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Prindipead:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Trükipea düüsid:
2112
Printimise korratavus
Average <= 1 dE2000, 95% of colors <= 2 dE2000
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Kandja

Kandja

 
Väljundi viimistlus:
  • Roll feed
  • take-up reel
  • automatic cutter (for vinyl, paper-based media, backlit polyester film)
Kandjate tüübid:
  • Banners, self-adhesive vinyls, films, fabrics, papers, wallcoverings, canvas, synthetics, mesh, textiles
Printimisväline ala (rullkandja):
5 x 5 x 0 x 0 mm (without edge holders)
Rulliku maksimaalne sisend:
1
Kandja maksimaalne laius:
1625 mm
Rulli maksimaalne kaal:
42 kg
Rulli välisläbimõõt:
250 mm
Kandja paksus:
Up to 19.7 mil
 

Mõõdud ja kaal

Mõõdud ja kaal

 
Miinimummõõtmed (L x S x K):
2561 x 840 x 1380 mm
Paki mõõtmed (W x D x H):
2795 x 760 x 1250 mm
Kaal:
216 kg
 

Keskkonnavahemikud

Keskkonnavahemikud

 
Töötemperatuuri vahemik:
15 to 30ºC
Niiskuse tööpiirkond:
20 to 80% RH (non-condensing)
 

Akustiline

Akustiline

 
Helirõhutase:
55 dB(A)
Helirõhu emissioonid (ooterežiim):
39 dB(A)
Helivõimsustase:
7.4 B(A)
Müraemissioonid (ooterežiim):
5.7 B(A)
 

Toide

Toide

 
Printimiskiirus
4.6 kW (printing)
85 watts (ready)
< 2.5 watts (sleep)
 

Sertifikaadid

Sertifikaadid

 
Vastab ENERGY STAR®-i nõuetele:
Yes
Keskkonnasertifikaadid:
  • CE marking compliant
  • ENERGY STAR®
  • EPEAT Bronze
  • EU RoHS
  • OSHA
  • REACH
  • RoHS Ukraine
  • RoHS Turkey
  • WEEE
 

Mis on kaasas

Mis on kaasas

 
Karbi sisu:
  • HP Latex 365 Printer
  • printheads
  • maintenance cartridge
  • ink collector
  • output platen protector
  • printer stand
  • spindle
  • take-up reel
  • variable front tension kit
  • loading accessory
  • user maintenance kit
  • edge holders
  • quick reference guide
  • setup poster
  • documentation software
  • power cords
Garantii:
One-year limited hardware warranty
 
1 Performance may vary depending on media—for more information, see the HP Media Solutions Locator. For best results, use textiles that do not stretch. The ink collector is required for porous textiles.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.