Spausdinimas

Spausdinimas

 
Spausdinimo sparta
50 m²/hr - Billboard (2 pass)
23 m²/hr - Outdoor High Speed (4 pass)
17 m²/hr - Outdoor Plus (6 pass)
13 m²/hr - Indoor Quality (8 pass)
10 m²/hr - Indoor High Quality (10 pass)
6 m²/hr - Backlits, Textiles, and Canvas (16 pass)
5 m²/hr - High Saturation Textiles (20 pass)
Spalvinio spausdinimo kokybė (geriausia):
Up to 1200 x 1200 dpi
Spausdinimo technologija:
  • HP Latex Printing Technologies
Rašalo rūšys:
  • HP Latex Inks
Spausdinimo kasečių skaičius:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimiser)
Spausdinimo galvutės:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Spausdinimo galvutės purkštukai:
2112
Spausdinimo pakartojamumas
Average <= 1 dE2000, 95% of colors <= 2 dE2000
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Lapas

Lapas

 
Išvesties apdorojimas:
  • Roll feed, take-up reel, automatic cutter (for vinyl, paper-based media, backlit polyester film)
Laikmenų tipai:
  • Banners, self-adhesive vinyls, films, papers, wallcoverings, canvas, synthetics, (fabrics, mesh, textiles and any other porous materials require a liner)
Ritinyje suvyniotos laikmenos nespausdinama sritis (ritiniui):
5 x 5 x 5 x 5 mm
Didžiausias įvesties ritinys:
1
Didžiausias laikmenų plotis:
1625 mm
Didžiausias ritinio svoris:
42 kg
Išorinis ritinėlių skersmuo:
250 mm
Lapo storis:
Up to 19.7 mil
 

Matmenys ir svoris

Matmenys ir svoris

 
Maksimalūs matmenys (plotis x gylis x aukštis):
2561 x 840 x 1380 mm
Pakuotės matmenys (P x I x A):
2795 x 760 x 1250 mm
Svoris:
208 kg
 

Aplinkos diapazonas

Aplinkos diapazonas

 
Darbinės temperatūros intervalas:
15 to 30ºC
Darbinės drėgmės diapazonas:
20 to 80% RH (non-condensing)
 

Akustinis

Akustinis

 
Akustinio slėgio emisija:
55 dB(A)
Akustinio slėgio sklaida (parengties režimu):
39 dB(A)
Akustinės galios emisija:
7.4 B(A)
Akustinės galios sklaida (parengties režimu):
5.7 B(A)
 

Maitinimas

Maitinimas

 
Spausdinimo sparta
2.6 kW (printing)
72 watts (ready)
< 2.5 watts (sleep)
 

Sertifikatai

Sertifikatai

 
Sertifikuotas „ENERGY STAR®“.:
Yes
Aplinkos sertifikatas:
  • CE marking compliant
  • ENERGY STAR®
  • EPEAT Bronze
  • EU RoHS
  • OSHA
  • REACH
  • RoHS Ukraine
  • RoHS Turkey
  • WEEE
 

Komplekto sudėtis

Komplekto sudėtis

 
Kas yra dėžėje:
  • HP Latex 335 Printer
  • printheads
  • maintenance cartridge
  • printer stand
  • spindle
  • take-up reel
  • variable front tension kit
  • user maintenance kit
  • edge holders
  • quick reference guide
  • setup poster
  • documentation software
  • FlexiPrint HP Edition RIP
  • power cords
Garantija:
One-year commercial hardware warranty
 
1 Based on a comparison of HP Latex Ink technology to competitors with leading market share as of December, 2013 and analysis of published MSDS/SDSs and/or internal evaluation. Performance of specific attributes may vary by competitor and ink technology/formulation.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.