Spausdinimas

Spausdinimas

 
Spausdinimo sparta
91 m²/hr - Max Speed (1 pass)
31 m²/hr - Outdoor High Speed (4 pass)
23 m²/hr - Outdoor Plus (6 pass)
17 m²/hr - Indoor Quality (8 pass)
14 m²/hr - Indoor High Quality (10 pass)
6 m²/hr - Backlits, Textiles, and Canvas (16 pass)
5 m²/hr - High Saturation Textiles (20 pass)
Spalvinio spausdinimo kokybė (geriausia):
Up to 1200 x 1200 dpi
Spausdinimo technologija:
  • HP Latex Printing Technologies
Rašalo rūšys:
  • HP Latex Inks
Spausdinimo kasečių skaičius:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Spausdinimo galvutės:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Spausdinimo galvutės purkštukai:
2112
Spausdinimo pakartojamumas
Average <= 1 dE2000, 95% of colors <= 2 dE2000
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Lapas

Lapas

 
Išvesties apdorojimas:
  • Roll feed
  • take-up reel
  • automatic cutter (for vinyl, paper-based media, backlit polyester film)
Laikmenų tipai:
  • Banners, self-adhesive vinyls, films, fabrics, papers, wallcoverings, canvas, synthetics, mesh, textiles
Ritinyje suvyniotos laikmenos nespausdinama sritis (ritiniui):
5 x 5 x 0 x 0 mm (without edge holders)
Didžiausias įvesties ritinys:
1
Didžiausias laikmenų plotis:
1625 mm
Didžiausias ritinio svoris:
42 kg
Išorinis ritinėlių skersmuo:
250 mm
Lapo storis:
Up to 19.7 mil
 

Matmenys ir svoris

Matmenys ir svoris

 
Maksimalūs matmenys (plotis x gylis x aukštis):
2561 x 840 x 1380 mm
Pakuotės matmenys (P x I x A):
2795 x 760 x 1250 mm
Svoris:
216 kg
 

Aplinkos diapazonas

Aplinkos diapazonas

 
Darbinės temperatūros intervalas:
15 to 30ºC
Darbinės drėgmės diapazonas:
20 to 80% RH (non-condensing)
 

Akustinis

Akustinis

 
Akustinio slėgio emisija:
55 dB(A)
Akustinio slėgio sklaida (parengties režimu):
39 dB(A)
Akustinės galios emisija:
7.4 B(A)
Akustinės galios sklaida (parengties režimu):
5.7 B(A)
 

Maitinimas

Maitinimas

 
Spausdinimo sparta
4.6 kW (printing)
85 watts (ready)
< 2.5 watts (sleep)
 

Sertifikatai

Sertifikatai

 
Sertifikuotas „ENERGY STAR®“.:
Yes
Aplinkos sertifikatas:
  • CE marking compliant
  • ENERGY STAR®
  • EPEAT Bronze
  • EU RoHS
  • OSHA
  • REACH
  • RoHS Ukraine
  • RoHS Turkey
  • WEEE
 

Komplekto sudėtis

Komplekto sudėtis

 
Kas yra dėžėje:
  • HP Latex 365 Printer
  • printheads
  • maintenance cartridge
  • ink collector
  • output platen protector
  • printer stand
  • spindle
  • take-up reel
  • variable front tension kit
  • loading accessory
  • user maintenance kit
  • edge holders
  • quick reference guide
  • setup poster
  • documentation software
  • power cords
Garantija:
One-year limited hardware warranty
 
1 Performance may vary depending on media—for more information, see the HP Media Solutions Locator. For best results, use textiles that do not stretch. The ink collector is required for porous textiles.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.