Drukāšana

Drukāšana

 
Drukāšanas ātrums
91 m²/hr - Max Speed (1 pass)
31 m²/hr - Outdoor High Speed (4 pass)
23 m²/hr - Outdoor Plus (6 pass)
17 m²/hr - Indoor Quality (8 pass)
14 m²/hr - Indoor High Quality (10 pass)
6 m²/hr - Backlits, Textiles, and Canvas (16 pass)
5 m²/hr - High Saturation Textiles (20 pass)
Krāsu drukāšanas kvalitāte (vislabākā):
Up to 1200 x 1200 dpi
Drukas tehnoloģija:
  • HP Latex Printing Technologies
Tinšu veidi:
  • HP Latex Inks
Drukas kasetņu skaits:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Drukas galvas:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Drukas galviņas sprauslas:
2112
Drukāšanas atkārtojamība
Average <= 1 dE2000, 95% of colors <= 2 dE2000
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Apdrukājamie materiāli

Apdrukājamie materiāli

 
Pabeigtas izvades apstrāde:
  • Roll feed
  • take-up reel
  • automatic cutter (for vinyl, paper-based media, backlit polyester film)
Materiālu veidi:
  • Banners, self-adhesive vinyls, films, fabrics, papers, wallcoverings, canvas, synthetics, mesh, textiles
Neapdrukājamais laukums ruļļa materiālam (ruļļa materiāls):
5 x 5 x 0 x 0 mm (without edge holders)
Veltņa maksimālais ievads:
1
Maksimālais materiālu platums:
1625 mm
Ruļļa maksimālais svars:
42 kg
Ruļļu ārējais diametrs:
250 mm
Datu nesēja biezums:
Up to 19.7 mil
 

Izmēri un svars

Izmēri un svars

 
Minimālie izmēri (P x D x A):
2561 x 840 x 1380 mm
Iesaiņojuma izmēri (P x D x A):
2795 x 760 x 1250 mm
Svars:
216 kg
 

Vides diapazoni

Vides diapazoni

 
Darba temperatūras diapazons:
15 to 30ºC
Ekspluatācijas mitruma diapazons:
20 to 80% RH (non-condensing)
 

Skaņas

Skaņas

 
Skaņas spiediena emisija:
55 dB(A)
Akustiskā spiediena emisijas (gaidīšana):
39 dB(A)
Skaņas jaudas emisija:
7.4 B(A)
Akustiskās jaudas emisijas (gaidīšana):
5.7 B(A)
 

Barošana

Barošana

 
Drukāšanas ātrums
4.6 kW (printing)
85 watts (ready)
< 2.5 watts (sleep)
 

Sertifikācija

Sertifikācija

 
ENERGY STAR® sertifikācija:
Yes
Apkārtējās vides sertifikācija:
  • CE marking compliant
  • ENERGY STAR®
  • EPEAT Bronze
  • EU RoHS
  • OSHA
  • REACH
  • RoHS Ukraine
  • RoHS Turkey
  • WEEE
 

Komplektācijā ietilpst:

Komplektācijā ietilpst:

 
Iepakojumā ietvertās detaļas:
  • HP Latex 365 Printer
  • printheads
  • maintenance cartridge
  • ink collector
  • output platen protector
  • printer stand
  • spindle
  • take-up reel
  • variable front tension kit
  • loading accessory
  • user maintenance kit
  • edge holders
  • quick reference guide
  • setup poster
  • documentation software
  • power cords
Garantija:
One-year limited hardware warranty
 
1 Performance may vary depending on media—for more information, see the HP Media Solutions Locator. For best results, use textiles that do not stretch. The ink collector is required for porous textiles.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.