Tiskanje

Tiskanje

 
Hitrost tiskanja
91 m²/hr - Max Speed (1 pass)
31 m²/hr - Outdoor High Speed (4 pass)
23 m²/hr - Outdoor Plus (6 pass)
17 m²/hr - Indoor Quality (8 pass)
14 m²/hr - Indoor High Quality (10 pass)
6 m²/hr - Backlits, Textiles, and Canvas (16 pass)
5 m²/hr - High Saturation Textiles (20 pass)
Kakovost barvnega tiskanja (najboljša):
Up to 1200 x 1200 dpi
Tehnologija tiskanja:
  • HP Latex Printing Technologies
Vrste črnila:
  • HP Latex Inks
Število tiskalnih kartuš:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Tiskalne glave:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Brizgalne šobe na tiskalni glavi:
2112
Ponavljanje tiskanja
Average <= 1 dE2000, 95% of colors <= 2 dE2000
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Medij

Medij

 
Obdelava končanih izpisov:
  • Roll feed
  • take-up reel
  • automatic cutter (for vinyl, paper-based media, backlit polyester film)
Vrste medijev:
  • Banners, self-adhesive vinyls, films, fabrics, papers, wallcoverings, canvas, synthetics, mesh, textiles
Nenatisljivo področje (zvitki):
5 x 5 x 0 x 0 mm (without edge holders)
Največji vhod zvitka:
1
Širina medijev, največja:
1625 mm
Največja masa zvitkov:
42 kg
Zunanji premer zvitka:
250 mm
Debelina medija:
Up to 19.7 mil
 

Mere in teža

Mere in teža

 
Najmanjše mere (Š x G x V):
2561 x 840 x 1380 mm
Velikost paketa (Š x G x V):
2795 x 760 x 1250 mm
Teža:
216 kg
 

Področje delovanja

Področje delovanja

 
Temperaturni obseg delovanja:
15 to 30ºC
Obseg vlažnosti za delovanje:
20 to 80% RH (non-condensing)
 

Akustično

Akustično

 
Tlak zvočnih emisij:
55 dB(A)
Tlak razpršitve zvoka (stanje pripravljenosti):
39 dB(A)
Moč zvočnih emisij:
7.4 B(A)
Jakost razpršitve zvoka (stanje pripravljenosti):
5.7 B(A)
 

Napajanje

Napajanje

 
Hitrost tiskanja
4.6 kW (printing)
85 watts (ready)
< 2.5 watts (sleep)
 

Potrdila

Potrdila

 
Potrdilo ENERGY STAR®:
Yes
Okoljski certifikat:
  • CE marking compliant
  • ENERGY STAR®
  • EPEAT Bronze
  • EU RoHS
  • OSHA
  • REACH
  • RoHS Ukraine
  • RoHS Turkey
  • WEEE
 

Kaj vključuje?

Kaj vključuje?

 
Vsebina škatle:
  • HP Latex 365 Printer
  • printheads
  • maintenance cartridge
  • ink collector
  • output platen protector
  • printer stand
  • spindle
  • take-up reel
  • variable front tension kit
  • loading accessory
  • user maintenance kit
  • edge holders
  • quick reference guide
  • setup poster
  • documentation software
  • power cords
Garancija:
One-year limited hardware warranty
 
1 Performance may vary depending on media—for more information, see the HP Media Solutions Locator. For best results, use textiles that do not stretch. The ink collector is required for porous textiles.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.