Set a new performance curve for your HP Z Workstation
HP Z Turbo Drive
Reduce boot up, calculation, and graphics response times (even with 4K video) and revolutionize how your HP Z Workstation handles large files with the HP Z Turbo Drive PCIe SSD, a remarkably affordable and innovative storage solution.
of SATA SSD
direct connect to PCIe
Handle large files and reduce your work time from hours to minutes with a solid state drive powered by Samsung ultra-fast M.2 PCIe SSD technology. Experience read performance of
> 1 GB/s – over 100% performance improvement for sequential read and sequential write over today’s SATA SSDs.
- View HP Z Turbo Drive specs Hide HP Z Turbo Drive specs View HP Z Turbo Drive specs
HP Z Turbo Drive specifications
HP Z Turbo Drive 256GB SSD HP Z Turbo Drive 512GB SSD NAND Type MLC MLC Read Bandwidth (128KB) 1.08GB/s 1.17GB/s Write Bandwidth (1MB) 800 MB/s 930 MB/s Random Read IOPS (4KB) 120K 122K Random Write IOPS (4KB) 60K 72K Endurance (Total Bytes Written) 146 TB 292 TB Weight 1.8oz (51g) 1.8oz (51g) Form Factor Half-height, half-length* Half-height, half-length* Supported platforms All desktop Workstations including HP Z230, HP Z420, HP Z620, HP Z820, HP Z440, HP Z640, and HP Z840 All desktop Workstations including HP Z230, HP Z420, HP Z620, HP Z820, HP Z440, HP Z640, and HP Z840
Access up to 2x the performance at a cost similar to today’s standard SSDs with this innovative solution. By relying on a PCIe connection, the bandwidth limitations found in today’s SATA SSD drives of 6Gb/s can be eliminated.
Connect the Z Turbo Drive directly to the workstation’s PCIe bus to eliminate the constraints due to SATA bus.
Optimized storage for your workstation
Integrate your performance by easily combining the HP Z Turbo Drive with higher capacity drives.1 Use your Z Turbo Drive as a boot and/or data drive.2 And with capacities of either 256 GB or 512 GB your flexibility knows no bounds.
- Recommended combinations of HP Z Turbo Drive with SATA SSD and HDD drives Hide recommended combinations of HP Z Turbo Drive with SATA SSD and HDD drives Recommended combinations of HP Z Turbo Drive with SATA SSD and HDD drives
For increasing performance
Total Drives Boot Data Entry 1 Z Turbo Drive G2 (256 GB or 512 GB) Mid-range 2 Z Turbo Drive G2 (256 GB or 512 GB) Z Turbo Drive G2 (256 GB or 512 GB) High-range 3 SATA SSD or HDD (128 GB to 1TB) Z Turbo Drive G2 x 2 (256 GB or 512 GB)
For increasing capacity
Total Drives Boot Data Entry 1 Z Turbo Drive G2 (256 GB or 512 GB) Mid-range 2 Z Turbo Drive G2 (256 GB or 512 GB) SATA HDD (7200 or 10K rpm) (1 TB to 3 TB) High-range 3 Z Turbo Drive G2 (256 GB or 512 GB) SATA 2 TB x 2 in RAID 0 (total available capacity > 12 TB**)
© Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
* Roughly, actual length is 4 inches (100cm)
** Depends on specific platform
- Each sold separately.
- Maximum of 4 Z Turbo Drives per system; each drive requires a PCIe x4 (minimum) slot.