Printing

Printing

 
Print speed
538 ft²/hr (50 m²/hr)- Billboard (2 pass); 248 ft²/hr (50 m²/hr)- Outdoor High Speed (4 pass); 183 ft²/hr (17 m²/hr)- Outdoor Plus (6 pass); 140 ft²/hr (13 m²/hr)- Indoor Quality (8 pass); 108 ft²/hr (10 m²/hr)- Indoor High Quality (10 pass); 65 ft²/hr (6 m²/hr)- Backlits, Textiles, and Canvas (16 pass); 54 ft²/hr (5 m²/hr)- High Saturation Textiles (20 pass)
Print quality color (best):
Up to 1200 x 1200 dpi
Print technology:
HP Latex Printing Technologies
Ink types:
  • Water-based HP Latex Inks
Number of print cartridges:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Print heads:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Print head nozzles:
2112
Print repeatability
Average ≤ 1 dE2000, 95% of colors ≤ 2 dE2000[1]
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) ≤ 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Media

Media

 
Finished output handling:
  • Roll feed, take-up reel, automatic cutter (for vinyl, paper-based media, backlit polyester film)
Media types:
  • Banners
  • self-adhesive vinyls
  • films
  • papers
  • wallcoverings
  • canvas
  • synthetics
  • (fabrics
  • mesh
  • textiles
  • and any other porous materials require a liner)
Non-printable area (roll media):
0.2 x 0.2 x 0.2 x 0.2 in
Roll maximum input:
1
Media width, maximum:
64 in
Roll maximum weight:
92.6 lb (42 kg)
Roll external diameter:
9.8 in (250 mm)
Media thickness:
Up to 19.7 mil
 

Dimensions and weight

Dimensions and weight

 
Minimum dimensions (W x D x H):
Printer: 101 x 33 x 54 in (2561 x 840 x 1380 mm); Cutter: 80 x 27 x 45 in (1980 x 680 x 1145 mm)
Package dimensions (W x D x H):
Printer: 110 x 30 x 50 in (2795 x 760 x 1250 mm); Cutter: 83 x 19 x 27 in (2110 x 480 x 670 mm)
Weight:
Printer: 459 lb (208 kg); Cutter: 119 lb (54 kg)
 

Environmental ranges

Environmental ranges

 
Operating temperature range:
Printer: 59 to 86ºF (15 to 30ºC); Cutter: 59 to 95ºF (15 to 35ºC)
Operating humidity range:
Printer: 20 to 80% RH (non-condensing); Cutter: 35 to 75% RH (non-condensing)
 

Acoustic

Acoustic

 
Acoustic pressure emissions:
Printer: 55 dB(A) (operating), 39 dB(A) (idle), <15 dB(A) (sleep); Cutter: 56 dB(A) (operating)
Acoustic power emissions (active, printing):
Printer: 7.4 B(A) (operating), 5.7 B(A) (idle), <3.5 B(A) (sleep); Cutter: 7.0 B(A) (operating)
 

Power

Power

 
Print speed
Printer: 2.6 kW (printing), 72 W (ready), <2.5 W (sleep)
Cutter: 31 W (working mode)
 

Certifications

Certifications

 
Energy star certified:
Printer: yes; Cutter: no
Environmental certification:
  • Printer: ENERGY STAR
  • WEEE
  • REACH
  • EPEAT Bronze
  • OSHA
 

What's included

What's included

 
What's in the box:
  • Printer: HP Latex 335 Printer, printheads, maintenance cartridge, printer stand, spindle, take-up reel, variable front tension kit, user maintenance kit, edge holders, quick reference guide, setup poster, power cords
  • Cutter: HP Latex 64 Cutter, cutter stand, media basket, HP FlexiPrint and Cut RIP, HP Cutter Control software, quick reference guide, setup poster, documentation software, power cords, standard holder (1), standard blades (2), cut-off knife (1), 3-in media flanges (set of 2)
Warranty:
Printer: 1 year limited hardware warranty; Cutter: 1 year provided that the HP Latex End of Installation Registration is completed by an HP authorized reseller
 
1 Based on HP internal testing February, 2017 comparing the HP Latex 300 Printer series Print and Cut solution with a solvent-technology based integrated print and cut solution at a comparable cost.
2 Requires an HP Applications Center account, Internet connection, and connected Internet-capable device. For more information, see hpapplicationscenter.com.
3 Scratch resistance is comparable to hard-solvent inks on self-adhesive vinyl and PVC banner. Scratch-resistance comparison based on testing third-generation HP Latex Inks and representative hard-solvent inks. Estimates by HP Image Permanence Lab on a range of media.