Printing

Printing

 
Print speed
538 ft²/hr (50 m²/hr)- Billboard (2 pass); 248 ft²/hr (23 m²/hr)- Outdoor High Speed (4 pass); 183 ft²/hr (17 m²/hr)- Outdoor Plus (6 pass); 140 ft²/hr (13 m²/hr)- Indoor Quality (8 pass); 108 ft²/hr (10 m²/hr)- Indoor High Quality (10 pass); 65 ft²/hr (6 m²/hr)- Backlits, Textiles, and Canvas (16 pass); 54 ft²/hr (5 m²/hr)- High Saturation Textiles (20 pass)
Print quality color (best):
Up to 1200 x 1200 dpi
Print technology:
HP Latex Printing Technologies
Ink types:
  • Water-based HP Latex Inks
Number of print cartridges:
7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Print heads:
  • 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 HP Latex Optimizer)
Print head nozzles:
2112
Print repeatability
Average ≤ 1 dE2000, 95% of colors ≤ 2 dE2000[1]
(The color variation inside a printed job has been measured at 10 pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.)
 

Media

Media

 
Finished output handling:
  • Roll feed, take-up reel, automatic cutter (for vinyl, paper-based media, backlit polyester film)
Media types:
  • Banners
  • self-adhesive vinyls
  • films
  • papers
  • wallcoverings
  • canvas
  • synthetics
  • (fabrics
  • mesh
  • textiles
  • and any other porous materials require a liner)
Non-printable area (roll media):
0.2 x 0.2 x 0.2 x 0.2 in
Roll maximum input:
1
Media width, maximum:
64 in
Roll maximum weight:
92.6 lb (42 kg)
Roll external diameter:
9.8 in (250 mm)
Media thickness:
Up to 19.7 mil
 

Dimensions and weight

Dimensions and weight

 
Minimum dimensions (W x D x H):
101 x 33 x 54 in (2561 x 840 x 1380 mm)
Package dimensions (W x D x H):
110 x 30 x 50 in (2795 x 760 x 1250 mm)
Weight:
459 lb (208 kg)
 

Environmental ranges

Environmental ranges

 
Operating temperature range:
59 to 86ºF (15 to 30ºC)
Operating humidity range:
20 to 80% RH (non-condensing)
 

Acoustic

Acoustic

 
Acoustic pressure emissions:
55 dB(A) (operating), 39 dB(A) (idle), <15 dB(A) (sleep)
Acoustic power emissions (active, printing):
7.4 B(A) (operating), 5.7 B(A) (idle), <3.5 B(A) (sleep)
 

Power

Power

 
Print speed
2.6 kW (printing), 72 W (ready), <2.5 W (sleep)
 

Certifications

Certifications

 
Energy star certified:
Yes
Environmental certification:
  • ENERGY STAR
  • WEEE
  • REACH
  • EPEAT Bronze
  • OSHA
 

What's included

What's included

 
What's in the box:
  • HP Latex 335 Printer, printheads, maintenance cartridge, printer stand, spindle, take-up reel, variable front tension kit, user maintenance kit, edge holders, quick reference guide, setup poster, documentation software, FlexiPrint HP Edition RIP, power cords
Warranty:
One-year limited hardware warranty
 
1 Based on a comparison of HP Latex Ink technology to competitors with leading market share as of December, 2013 and analysis of published MSDS/SDSs and/or internal evaluation. Performance of specific attributes may vary by competitor and ink technology/formulation.
2 Estimates by HP Image Permanence Lab on a range of media. Scratch-resistance comparison based on testing HP Latex Inks and representative hard-solvent inks. Outdoor display permanence tested according to SAE J2527 using HP Latex Inks on a range of media, including HP media; in a vertical display orientation in simulated nominal outdoor display conditions for select high and low climates, including exposure to direct sunlight and water; performance may vary as environmental conditions change. Laminated display permanence using HP Clear Gloss Cast Overlaminate. Results may vary based on specific media performance.